The MultiRAE Pro is very versatile with the ability to replace up to 25 different types of sensors to monitor a wide range of hazards, including volatile organic compounds (VOCs, toxic gases, flammable gases, concentrations) O2 gas, as well as gamma radiation detection. It features a large screen and simple sensor, pen, and battery replacement, making it easy to use and calibrate, with 5 different alarm types including low level alerts, providing you with flexibility required for rapid incident detection and response.

• World’s first wireless1,3 portable multi-threat monitor

• Highly versatile and customizable for different applications

• Man Down Alarm with real-timeremote wireless notification

• Easy maintenance with replaceable sensors, pump, and plug-and-play battery

• Fully automated bump testing and calibration with AutoRAE 21

 

Gamma 0 to 20,000 microREM/h to 4.29 REM (dose range)

VOC 10.6 eV (HR) 0 to 5,000 ppm

VOC 10.6 eV (ppb) 0 to 2,000 ppm

VOC 9.8 eV1  0 to 1,000 ppm

Catalytic LEL 0 to 100% LEL

NDIR (0-100% LEL Methane) 0 to 100% LEL

NDIR (0-100% Vol. Methane) 0 to 100% Vol

Carbon Dioxide (CO2) NDIR 0 to 50,000 ppm 100 ppm

Ammonia (NH3) 0 to 100 ppm 1 ppm

Carbon Monoxide (CO) 0 to 500 ppm

Carbon Monoxide (CO), Ext. Range 0 to 2,000 ppm

Carbon Monoxide (CO), H2-comp 0 to 2,000 ppm

Carbon Monoxide (CO) 0 to 500 ppm

+ Hydrogen Sulfide (H2S) Combo 0 to 200 ppm

Chlorine (Cl2) 0 to 50 ppm 0.1 ppm

Chlorine Dioxide (ClO2) 0 to 1 ppm 0.03 ppm

Ethylene Oxide (EtO-A) 0 to 100 ppm

Ethylene Oxide (EtO-B) 0 to 10 ppm

Ethylene Oxide (EtO-C), Ext. 0 to 500 ppm

Formaldehyde (HCHO) 0 to 10 ppm

Hydrogen (H2) 0 to 1,000 ppm 2 ppm

Hydrogen Chloride (HCl) 0 to 15 ppm

Hydrogen Cyanide (HCN) 0 to 50 ppm

Hydrogen Fluoride (HF) 0 to 10 ppm

Hydrogen Sulfide (H2S) 0 to 100 ppm

Hydrogen Sulfide (H2S), Ext. Range 0 to 1,000 ppm

Methyl Mercaptan (CH3-SH) 0 to 10 ppm

Nitric Oxide (NO) 0 to 250 ppm 0.5 ppm

Nitrogen Dioxide (NO2) 0 to 20 ppm

Oxygen (O2) 0 to 30% Vol

Phosgene (COCl2) 0 to 1 ppm

Phosphine (PH3) 0 to 20 ppm

Phosphine (PH3), Ext. Range 0 to 1,000 ppm

Sulfur Dioxide (SO2) 0 to 20 ppm

 

Size 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm)

Weight 31 oz. (880 g)

Sensors Over 30 intelligent interchangeable field-replaceable sensors including gamma radiation, ppb and ppm PID sensors for VOCs, electrochemical sensors for toxic gases and oxygen, combustible LEL and NDIR sensors, and CO2 NDIR sensor

Battery Options

- Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time)

- Extended duration Li-ion (~18-hr. runtime, < 9-hr. recharge time)

- Alkaline adapter with 4 x AA batteries (~6-hr. runtime)

Display Monochrome graphical LCD display (128 x 160) with backlighting Automatic screen “flip” feature Display Readout

- Real-time reading of gas concentrations; PID measurement gas and correction factor; battery status; datalogging on/off; wireless on/off and reception quality.

- STEL, TWA, peak, and minimum values

Keypad Buttons 3 operation and programming keys (Mode, Y/+, and N/-)

Sampling Built-in pump. Average flow rate: 250 cc/min. Auto shutoff in low-flow conditions

Calibration Automatic with AutoRAE 2 Test and Calibration System1 or manual

Alarms Wireless remote alarm notification; multi-tone audible (95 dB @ 30 cm), vibration, visible (flashing bright red LEDs), and on-screen indication of alarm conditions

- Man Down Alarm with pre-alarm and real-time remote wireless notification

Datalogging

- Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7)

- User-configurable datalogging intervals (from 1 to 3,600 seconds)

Communication and Data Download

- Data download and instrument set-up and upgrades on PC via charging and PC comm. cradle, travel charger, or AutoRAE 2 Automated Test and Calibration System1

- Wireless data and alarm status transmission via built-in RF modem (optional)

Wireless Network RAE Systems Dedicated Wireless Network

Wireless Frequency ISM license-free bands

Wireless Range (Typical) 656 feet (200 meters)

Operating Temperature -4° to 122°F (-20° to 50°C)

Humidity 0% to 95% relative humidity (non-condensing)

Dust and Water Resistance IP-65/IP-67 (when off) rating

Hazardous Location Approvals CSA: Class I, Division 1, Groups A, B, C and D, T4 ATEX: 0575 II 2G Ex ia d IIC T4 Gb IECEx: Ex ia d IIC T4 Gb

CE Compliance (European Conformity) EMC directive: 2004/108/EC. R&TTE directive: 1999/5/EC. ATEX directive: 94/9/EC

EMI/RFI No effect when exposed to 0.43mW/cm2 RF interference from a 5-watt transmitter at 12"

Performance Tests MIL-STD-810F compliant. LEL CSA C22.2 No. 152; ISA-12.13.01

Languages Arabic, Chinese, Czech, Danish, Dutch, English, French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, and Swedish