The ToxiRAE Pro is the world’s first wireless personal monitor for toxic gases and oxygen1. The ToxiRAE Pro can detect a broad range of gases—from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and formaldehyde2. The ToxiRAE Pro provides safety professionals wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response. The ToxiRAE Pro’s intelligent interchangeable sensors store calibration data, which allows users to monitor for one gas one day and another gas the next, by simply swapping the sensors in the ToxiRAE Pro3.

Type gas and range:

• AMMONIA (NH3)   0 to 100 ppm
• CARBON MONOXIDE (CO)   0 to 500 ppm
• CARBON MONOXIDE (CO)   0 to 2,000 ppm
• EXT. RANGE CARBON MONOXIDE (CO), H2-COMP.   0 to 2,000 ppm
• CHLORINE (CI2)   0 to 50 ppm
• CHLORINE DIOXIDE (CIO2)   0 to 1 ppm
• ETHYLENE OXIDE (ETO-A)   0 to 100 ppm
• ETHYLENE OXIDE (ETO-B)    0 to 10 ppm
• ETHYLENE OXIDE (ETO-C), EXT. RANGE   0 to 500 ppm
• FORMALDEHYDE (HCHO)   0 to 10 ppm
• HYDROGEN (H2)   0 to 1,000 ppm
• HYDROGEN CYANIDE (HCN)   0 to 50 ppm
• HYDROGEN SULFIDE (H2S)   0 to 100 ppm
• HYDROGEN SULFIDE (H2S), EXT. RANGE   0 to 1,000 ppm
• METHYL MERCAPTAN (CH3-SH)   0 to 10 ppm
• NITRIC OXIDE (NO)   0 to 250 ppm
• NITROGEN DIOXIDE (NO2)   0 to 20 ppm
• OXYGEN (O2)   0 to 30% Vol
• PHOSPHINE (PH3)   0 to 20 ppm
• SULFUR DIOXIDE (SO2)   0 to 20 ppm

Specifications:

SIZE: 4.6" H x 2.4" W x 1.2" D (118 x 60 x 30 mm)

WEIGHT: 7.76 oz. (220 g)

SENSORS: Over 20 intelligent interchangeable field-replaceable electrochemical sensors

BATTERY: Rechargeable Li-ion battery

-    Operating time: > 30 hours (normal operation, non-wireless)

-    Recharge time: < 4 hours through charging cradle

DISPLAY: Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press)

DISPLAY READOUT:

-Real-time reading of gas concentrations in parts per million (ppm) or mg/m3; battery status; data logging on/off; wireless on/off and reception quality - STEL, TWA, and peak values KEYPAD 2 buttons for operation and programming SAMPLING Diffusion CALIBRATION Automatic with AutoRAE 2 Test and Calibration System2 or manual

ALARM MODES:

-        Wireless remote alarm notification; audible (95 dB @ 30 cm), vibration, visible alarm (flashing bright red LEDs), and on-screen indication of alarm conditions.

-       Man Down Alarm with pre-alarm and real-time remote wireless notification

DATALOGGING:

-    Continuous datalogging with a three-month capacity (at one-minute intervals)

-    User-configurable datalogging interval (from 1 to 3,600 seconds)

COMMUNICATION AND DATA DOWNLOAD:

-    Data download and instrument set-up on PC via charging and PC comm. cradle

-    Data download via AutoRAE 2 Automatic Test and Calibration System

-    Wireless data and status transmission via built-in RF modem (optional)

WIRELESS NETWORK: ProRAE Guardian Real-Time Wireless Safety System or Closed Loop Network with the EchoView Host

WIRELESS RANGE (TYPICAL): ToxiRAE Pro to Mesh Router, EchoView Host, or Mesh Reader2 ~ 660 feet (200 meters) ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems ~ 330 feet (100 meters)

OPERATING TEMPERATURE: -4° to 131°F (-20° to 55°C) HUMIDITY 0% to 95% relative humidity (non-condensing)

DUST AND WATER RESISTANCE: IP-65 rating for dust and water ingress protection (validated by an independent test laboratory)

SAFETY CERTIFICATIONS CSA: Class I, Division 1, Groups A, B, C and D. T-code T4 Class I, Zone 0 A/Exia IIC T4 ATEX: , II 1G, Ex ia IIC Ga T4 IECEx: Ex ia IIC Ga T4 China Ex: Ex ia IIC T4